diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index 7a704cf..638833d 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -8,3 +8,4 @@
 F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021aqds_sdcard_defconfig
 F:	configs/ls1021aqds_qspi_defconfig
+F:	configs/ls1021aqds_nand_defconfig
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 9fcd129..691e828 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -187,6 +187,22 @@
 {
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
 
+#ifdef CONFIG_NAND_BOOT
+	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+	u32 porsr1, pinctl;
+
+	/*
+	 * There is LS1 SoC issue where NOR, FPGA are inaccessible during
+	 * NAND boot because IFC signals > IFC_AD7 are not enabled.
+	 * This workaround changes RCW source to make all signals enabled.
+	 */
+	porsr1 = in_be32(&gur->porsr1);
+	pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
+		 DCFG_CCSR_PORSR1_RCW_SRC_I2C);
+	out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
+		 pinctl);
+#endif
+
 	/* Set global data pointer */
 	gd = &gdata;
 
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
new file mode 100644
index 0000000..222c71d
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# serdes protocol
+0608000a 00000000 00000000 00000000
+60000000 00407900 e0106a00 21046000
+00000000 00000000 00000000 00038000
+00000000 001b7200 00000000 00000000